Electric Patio Heater Buying Guide
Electric patio heaters convert electricity into radiant infrared heat to warm people and objects outdoors without heating the surrounding air. The primary trade-off is between radiant efficiency (how much heat reaches you per watt) and weather-sealed build quality, since outdoor units must survive rain, dust, and temperature swings. The clear decision rule: choose a heater with at least IP65 ingress protection, a stable weighted or tripod base, and a radiant footprint matched to your seating distance; skip any unit rated IP44 or lower for permanent outdoor exposure.
At a glance
- Price range
- Varies by listing
- Category
- Fans, Heaters & Humidifiers
- Last updated
- Nov 22, 2026
Current offers
Highlights
- Infrared radiant heaters deliver directional warmth that is felt instantly and is not lost to wind, unlike convection heaters that heat air.
- IP65 rating means dust-tight and protected against water jets, the minimum for uncovered patios; IP44 only resists splashes and is not rain-safe.
- 1500W is the standard maximum for 120V household circuits, drawing 12.5A and requiring a dedicated 15A or 20A outdoor GFCI outlet.
- Tripod and weighted-base standing heaters are portable but tip-prone in wind; wall-mounted and ceiling-mounted units free floor space and are more stable.
Best use cases
- Best fit: covered porch or gazebo with a dedicated GFCI outlet — pick a 1500W IP65 tripod or pedestal unit with 3 heat settings and a timer for flexible placement.
- Best fit: open deck or patio exposed to rain — choose an IP65 wall-mounted or ceiling-mounted infrared unit to eliminate tip-over risk and save floor space.
- Wrong fit: large open yard or windy hilltop — radiant electric heaters lose effectiveness past roughly 8–10 ft; skip electric and consider a propane or natural-gas heater instead.
- Wrong fit: indoor garage or enclosed room — outdoor-rated infrared heaters are not designed for confined spaces; skip them and use an indoor-rated space heater with tip-over shutoff.
Buying tips
- Match radiant coverage to distance: a 1500W infrared unit comfortably heats 1–2 people within 6–8 ft; add a second unit or a higher-output 240V model for larger groups.
- Confirm the outlet: 1500W at 120V draws 12.5A, so a 15A circuit is the minimum and a 20A dedicated outdoor GFCI circuit is safer for continuous use.
- Prioritize IP65 or higher for any unit left outside year-round; IP44 and IPX4 ratings are splash-resistant only and will fail in direct rain.
- Choose a weighted base of at least 20–30 lbs or a mount that anchors to a wall or ceiling; lightweight tripods tip in gusts above 15–20 mph.
Specs
| IP Rating | IP65 min outdoor / IP44 covered only |
|---|---|
| Wattage / Circuit | 1500W max on 120V 15A GFCI |
| Heat Throw | 6-8 ft comfortable radiant zone |
| Mount Type | Tripod, pedestal, wall, ceiling |
Related searches
What to check before buying
- Measure your seating zone: confirm the heater will be within 6–8 ft of people, since radiant heat drops sharply with distance.
- Verify the outlet: a dedicated 15A or 20A outdoor GFCI receptacle within cord reach (typically 6–10 ft) is required for 1500W units.
- Check mounting surface: for wall or ceiling units, confirm a stud, beam, or masonry anchor point and the required clearance from combustibles.
- Assess wind and cover: uncovered, windy patios need IP65 plus a weighted base or fixed mount; covered areas can use IP44 with a tripod.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds. Updated Nov 22, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.