Under Video Surveillance Sign Buying Guide
An 'under video surveillance' sign is a printed or engraved wall plaque that provides legal notice of camera monitoring, typically placed at entrances or perimeters. The primary trade-off is between thin, UV-fading plastic or vinyl and rigid, weather-rated aluminum or acrylic that survives outdoor exposure and complies with notice requirements. Choose powder-coated aluminum or cast acrylic with pre-drilled holes and UV-stable inks for permanent installation; skip thin polystyrene or adhesive-only decals for exterior gates or long-term use.
At a glance
- Price range
- Varies by listing
- Category
- Metal Signs & Wall Plaques
- Last updated
- Nov 22, 2026
Current offers
Highlights
- Material grade determines lifespan: 0.040-0.063 inch aluminum or 0.25 inch cast acrylic resists warping and UV yellowing; 0.02 inch polystyrene or vinyl cracks and fades within a season outdoors.
- UV-stable pigment inks and clear-coat lamination prevent 'under video surveillance' text from bleaching to illegible grey, while uncoated screen print loses contrast within 6-12 months of direct sun.
- Pre-drilled corner holes at 3/16 inch diameter with matching stainless screws allow secure mounting to brick, stucco, or wood without adhesive failure; adhesive-only backing peels below 40°F and on textured surfaces.
- Standard notice dimensions run 7 x 10 inches to 12 x 18 inches; letter height of at least 1 inch is needed for the 'under video surveillance' legend to remain readable at 10-15 feet per typical signage legibility ratios.
Best use cases
- Best fit: a 10 x 14 inch powder-coated aluminum sign with pre-drilled holes and UV clear coat for an outdoor driveway gate or commercial entrance exposed to rain and sun; skip thin adhesive vinyl decals here.
- Best fit: a 7 x 10 inch cast acrylic or engraved plastic plaque for an indoor lobby or retail checkout with clean drywalls; skip cast metal or thick aluminum where weight and cost add no benefit.
- Wrong fit: a paper or foam-board print for any exterior location, temporary or permanent; moisture and wind destroy it quickly and the notice becomes unreadable.
- Best fit: a bilingual or symbol-plus-text aluminum sign for high-traffic public entrances where quick recognition matters; skip purely decorative wood or rustic plaques that lack durable weather sealing.
Buying tips
- Measure the mounting surface first: allow at least 6 inches of clear wall on each side of the sign for visibility and screw clearance, and choose sign height so the legend sits at 48-60 inches above finished floor for eye-level notice.
- Match material to exposure: use 0.040 inch or thicker aluminum with powder coat for exterior; use 0.25 inch cast acrylic or 0.060 inch engraved plastic for interior where moisture and UV are low.
- Check ink and lamination: specify UV-stable pigment or vinyl lettering under clear coat rather than uncoated screen print; this preserves contrast and legal legibility under direct sun.
- Confirm mounting hardware compatibility: 3/16 inch pre-drilled holes accept #8 or #10 stainless screws and anchors; for brick or stucco, pair with masonry anchors rather than drywall plugs.
Specs
| Material Grade | Aluminum / Cast Acrylic / Polystyrene |
|---|---|
| Thickness | 0.040-0.063 in metal, 0.25 in acrylic |
| UV Protection | UV-stable ink + clear-coat lamination |
| Mounting Type | Pre-drilled holes / adhesive backing |
Related searches
What to check before buying
- Measure the exact wall or fence area and confirm the chosen sign dimensions leave 6 inches of clear space around the plaque for screw access and legibility.
- Verify the mounting surface type (drywall, wood, brick, stucco, metal) and select matching anchors and stainless screws; pre-drilled holes must align with your anchor spacing.
- Check outdoor exposure: direct sun, rain, and freeze-thaw cycles require powder-coated aluminum or UV-rated acrylic; indoor drywall can use lighter acrylic or engraved plastic.
- Confirm the sign text matches local notice requirements for size and placement, and that letter height stays at least 1 inch for the 'under video surveillance' legend.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds. Updated Nov 22, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.