Photos from current listings. Actual item, color, and included accessories may vary.
Metal House Number Buying Guide
Metal house numbers are exterior address plaques or individual numerals fabricated from aluminum, steel, or brass and specified primarily by metal grade, finish system, and mounting method. The core trade-off is between cast/etched solid metal that survives a decade of UV and freeze-thaw cycles versus thin laser-cut sheet or coated mild steel that fades, rusts, or warps within two to three winters. The decision rule: buy 3mm-or-thicker aluminum or 16-gauge 304 stainless with a powder-coat or PVD finish for permanent exterior mounting, and only choose thinner decorative plaques for covered porches or interior use.
At a glance
- Category
- Metal Signs & Wall Plaques
- Last updated
- Nov 22, 2026
Current offers
CIFbuy Custom Mountain Forest Design Metal House Number Sign$24.99View on Mallflare
CIFbuy Custom Home Address Metal Sign Personalized House Number Plaque$18.99View on Mallflare
CIFbuy Custom Home Address Metal Plaque Personalized House Number Sign$18.99View on Mallflare
CIFbuy Custom Metal House Address Sign Deer Mountain Artwork Yard Number Plaque$18.99View on Mallflare
CIFbuy Personalized Metal Private Parking Sign Custom House Number Street Name$18.99View on Mallflare
CIFbuy Custom House Address Sign Metal Plaque Gold Silver Numbers$18.99View on Mallflare
CIFbuy Custom Home Address Plaque Metal Brushed Gold Design Text House Number Sign$18.99View on Mallflare
Highlights
- Aluminum plaques at 3mm (0.12 in) or thicker resist warping and hold etched or cast numerals; 1.5mm sheet bows and oil-cans across wide spans.
- 304 stainless in 16-gauge (1.5mm) is the corrosion baseline for coastal and humid climates; 430-series or zinc-plated mild steel rusts at cut edges.
- Cast brass and bronze accept deep relief numerals and patina uniformly, while painted steel letters chip and require touch-up within two seasons.
- Powder-coat over chromate conversion or PVD titanium coating outlasts sprayed enamel by roughly 3-5x in salt-spray and UV-accelerated testing.
Best use cases
- Best fit: street-facing wall or mailbox post in full sun and rain — choose 3mm aluminum or 16-gauge 304 stainless with powder-coat, and specify stainless or brass fasteners.
- Best fit: covered entryway or interior lobby where UV and rain are minimal — 1.5-2mm laser-cut steel with baked enamel is acceptable and allows finer script fonts.
- Wrong fit: coastal salt-spray zones with painted mild steel or 430 stainless — skip these and step up to 316 stainless or cast bronze to avoid edge rust.
- Wrong fit: brick or stucco facades using adhesive-only mounting — skip tape and select plaques pre-drilled for standoff anchors or masonry screws.
Buying tips
- Match plaque width to numeral count: 3-4 characters need roughly 8-10 in width, 5-6 characters 12-16 in; undersized plaques force cramped, hard-to-read numerals.
- For backlit or nighttime visibility, choose 3mm aluminum with 1-2 in tall numerals and specify a matte or satin finish that reduces glare from porch lights.
- Confirm fastener grade: 304 or 316 stainless screws and standoffs prevent galvanic staining on aluminum and rust streaks on painted facades.
- Specify digit height relative to viewing distance: 2 in numerals read at about 30-40 ft, 3 in at 50-60 ft, 4 in at 75-100 ft from the street.
Specs
| Metal Grade | 3mm aluminum / 16ga 304 or 316 SS |
|---|---|
| Finish System | Powder-coat, PVD, cast brass patina |
| Numeral Height | 2 in / 3 in / 4 in by viewing distance |
| Mounting | Pre-drilled + stainless standoffs |
Related searches
What to check before buying
- Measure the mounting surface and confirm at least 1 in of clearance around the plaque for drill access and standoff hardware.
- Verify substrate: brick, stone, and stucco need masonry anchors; vinyl siding needs a backing block or the plaque will flex and crack the siding.
- Check climate exposure: coastal or de-icing-salt zones require 316 stainless or cast bronze; inland covered entries can use 304 or powder-coated aluminum.
- Confirm the plaque arrives pre-drilled with matching stainless fasteners and standoff spacers, or plan to drill and seal penetrations yourself.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds. Updated Nov 22, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.
