Picture Mat Buying Guide
A picture mat is the bevel-cut board between the frame and the artwork, and its thickness, core material, and cut quality determine whether a print looks gallery-grade or cheap. Most buyer mistakes are sizing (cutting the mat to the photo instead of the frame opening) and material (paper mats that yellow and burn the art). Choose by mat type, thickness, and opening dimensions before you fall for color.
Mat Thickness:4-ply (1.4 mm) vs 8-ply (3 mm)Acid Status:Acid-free buffered vs acidic paperBevel Core:White core / black core / color coreOuter Sizing:5x7 to 18x24 standard frame sizes
At a glance
- Price range
- Varies by listing
- Category
- Picture Frames & Photo Displays
- Last updated
- Nov 22, 2026
Current offers
Highlights
- Standard mat thickness is 4-ply (about 1.4 mm); 8-ply (about 3 mm) is the step up for large or high-value art because it holds a deeper bevel and resists bowing.
- Acid-free and lignin-free mats (often buffered to pH 7.5-9.5) prevent mat burn and yellowing; ordinary paper mats off-gas acids onto the print over time.
- A bevel cut at 45 degrees exposes the core color; white-core mats show a clean white line, black-core mats show a dark line, and color-core mats match the surface.
- Mat opening should be 1/8 to 1/4 inch smaller per side than the artwork so the art sits under the bevel without slipping; the mat's outer size must equal the frame's rabbet size.
Best use cases
- Best fit: archival pigment prints or family photos going behind glass long-term — pick acid-free 4-ply or 8-ply mats with a white or black core and a 1/4-inch overlap per side.
- Best fit: kids' art, posters, or swap-out displays — choose pre-cut standard-size mats in 4-ply paper core and accept that they may need replacing every few years.
- Wrong fit: floating a canvas or unframed print with a mat — mats are for works on paper behind glazing; canvas needs a floater frame, not a mat.
- Wrong fit: buying a mat by photo size alone — a 5x7 photo needs an 8x10 mat with a 4.5x6.5 opening, not an 8x10 opening that leaves the print swimming.
Buying tips
- Measure the frame's rabbet (inside lip) and order a mat whose outer dimension matches it exactly; standard mats come in 5x7, 8x10, 11x14, 16x20, and 18x24 outer sizes.
- Size the opening 1/8 to 1/4 inch smaller per side than the art; for a 5x7 print, use a 4.5x6.5 opening, and for an 8x10 print, a 7.5x9.5 opening.
- Prioritize acid-free, lignin-free board for anything you want to keep; buffered mats are best for photos, and unbuffered acid-free mats suit textiles and some inkjet prints.
- Choose 8-ply over 4-ply when the mat outer size exceeds 16x20 or the frame is deep, because thin mats bow and cast shadows at large sizes.
Specs
| Mat Thickness | 4-ply (1.4 mm) vs 8-ply (3 mm) |
|---|---|
| Acid Status | Acid-free buffered vs acidic paper |
| Bevel Core | White core / black core / color core |
| Outer Sizing | 5x7 to 18x24 standard frame sizes |
What to check before buying
- Measure the frame's inside rabbet width and height — this is the mat's outer size, not the photo size.
- Measure the artwork's visible image area and subtract 1/8 to 1/4 inch per side to set the mat opening.
- Confirm the frame depth can hold glass, mat, art, and backing — 4-ply mats need about 1/8 inch of depth, 8-ply about 1/4 inch.
- Check the mat's core color against the frame and art; white core is safest, black core adds contrast, and colored cores must be acid-free.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds. Updated Nov 22, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.