Housewares Guide

Range Hood Filter Replacement Buying Guide

Range hood filters are the consumable grease- and odor-trapping layer that protects your blower and kitchen air; the core trade-off is mesh (washable, fire-safe, cheap) versus baffle (commercial-grade, high-CFM) versus charcoal (odor-only, non-washable). The decision rule: match filter media to your hood's CFM and ducting—mesh or baffle for vented hoods, charcoal only for recirculating—and never substitute a filter that restricts airflow below the hood's rated capacity.

Filter Media:Aluminum mesh / stainless baffle / carbonAirflow Rating:Mesh ≤600 CFM; baffle 600+ CFMWashability:Mesh & baffle dishwasher-safe; carbon noHood Type Fit:Ducted: grease only; recirculating: + carbon

At a glance

Price range
Varies by listing
Category
Home Appliances
Last updated
Nov 22, 2026

Current offers

No live listings right now. Search directly on:

Highlights

  • Mesh filters are aluminum or stainless steel, washable, and typically rated for 300–600 CFM; baffle filters use stainless steel slats for 600–1200+ CFM commercial hoods and are dishwasher-safe.
  • Charcoal/activated-carbon filters are non-washable, last 3–6 months, and only apply to ductless/recirculating hoods—they do not replace grease mesh.
  • Filter dimensions are nominal, not exact: a '10×12' mesh filter often measures 9.75×11.75 inches, so measure the opening and compare to the listed cut size.
  • Ducted hoods need grease filtration only; recirculating hoods need both a grease pre-filter and a charcoal odor filter, or a combination cartridge.

Best use cases

  • Best fit: standard 30-inch ducted under-cabinet hood at 300–400 CFM — choose a washable aluminum mesh filter sized to the hood's filter slot; skip charcoal unless you recirculate.
  • Best fit: high-output island or pro-style hood at 600+ CFM — choose stainless baffle filters; skip thin mesh, which can deform and bypass grease at high airflow.
  • Best fit: recirculating/ductless hood in a rental or condo — choose a charcoal filter plus mesh pre-filter; skip baffle-only setups because they do not remove odors.
  • Wrong fit: buying a 'universal' cut-to-size mesh sheet for a hood with a rigid frame or proprietary clip — skip it; order the exact model-specific filter or a direct-fit replacement.

Buying tips

  • Measure the filter slot length × width to the nearest 1/8 inch and compare against the filter's actual (not nominal) dimensions; a 1/4-inch oversize will not seat and an undersize will bypass grease.
  • Match filter type to CFM: mesh for ≤600 CFM, baffle for ≥600 CFM; charcoal only on recirculating hoods, replaced every 3–6 months depending on cooking frequency.
  • Check dishwasher suitability: aluminum mesh and stainless baffle are dishwasher-safe; charcoal and most composite filters are not and must be hand-rinsed or replaced.
  • Confirm the retention method—slotted frame, spring clips, or center screw—before ordering; filters with the wrong clip pattern will not lock into the hood.

Specs

Filter MediaAluminum mesh / stainless baffle / carbon
Airflow RatingMesh ≤600 CFM; baffle 600+ CFM
WashabilityMesh & baffle dishwasher-safe; carbon no
Hood Type FitDucted: grease only; recirculating: + carbon

Related searches

What to check before buying

  • Measure the hood's filter opening (length, width, thickness) and note the retention type: slot, clip, or screw.
  • Confirm whether the hood is ducted (grease filter only) or recirculating (grease + charcoal).
  • Verify the hood's rated CFM and choose mesh (≤600 CFM) or baffle (≥600 CFM) accordingly.
  • Check the filter material's dishwasher rating and replacement interval before committing to a multi-pack.

FAQ

All Home Appliances buying guides

Data sources: eBay / Amazon listings and product attribute feeds. Updated Nov 22, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.