Long Shower Curtain Buying Guide
Long shower curtains are extra-length liners or decorative panels (typically 72–96 inches long) made to fit high-ceiling tubs, clawfoot tubs, and shower-only stalls where standard 72-inch curtains leave a gap. The primary trade-off is waterproofing versus drape: PEVA/EVA and coated polyester block water but hang stiffly, while cotton and linen blends drape well yet need a liner and dry slower. The decision rule is simple: buy a long liner in PEVA/EVA or coated polyester for the wet zone, and add a separate long decorative curtain only if you have ceiling height and a rod rated for the added weight.
At a glance
- Price range
- Varies by listing
- Category
- Bathroom Accessories
- Last updated
- Nov 22, 2026
Current offers
Highlights
- Standard curtains are 72 in long; long options run 78, 84, 90, and 96 in, so measure rod height minus 1–2 in floor clearance to choose the drop.
- PEVA and EVA are chlorine-free vinyl alternatives that resist mildew better than PVC; coated polyester is the most durable waterproof fabric tier.
- Grommet count and header type matter: 12 rustproof metal grommets on a reinforced header resist tearing better than 8 plastic-ring punch holes.
- Weight tiers separate drapes: 6–8 oz/yd² cotton drapes softly; 10–12 oz/yd² cotton-linen blends hold pleats but need a sturdier rod.
Best use cases
- High-ceiling tub or clawfoot tub: pick an 84–96 in PEVA/EVA liner sized to rod height minus 1 in; skip standard 72 in curtains that leave a 6–12 in splash gap.
- Shower-only stall with a long curtain: choose a 78–84 in coated polyester liner with weighted hem; skip lightweight cotton that clings when wet.
- Decorative two-curtain setup: use a 90–96 in cotton-linen outer curtain plus a same-length PEVA liner; skip single-layer decorative fabric as the only wet-zone barrier.
- Standard 72 in rod height: buy a standard 70–72 in curtain, not a long one; long curtains bunch on the floor and wick water.
Buying tips
- Sizing formula: curtain length = rod height above floor minus 1 in for liner clearance (or minus 0.5 in for a just-touching look); width should be 1.5–2× rod width for pleating.
- Choose PEVA/EVA for the liner (waterproof, mildew-resistant, no PVC chlorine) and coated polyester for the most tear-resistant long liner; reserve cotton/linen for decorative outer panels.
- Match grommet material to humidity: stainless steel or rustproof coated brass grommets outlast painted steel in steamy bathrooms; 12 grommets on a reinforced header reduce tear-out.
- For heavy 10–12 oz/yd² long curtains, use a rod rated for the load and wall anchors; a tension rod alone is unsafe above roughly 5–6 lb of hanging fabric.
Specs
| Length Tiers | 72 / 78 / 84 / 90 / 96 in |
|---|---|
| Wet-Zone Material | PEVA / EVA / coated polyester |
| Header Hardware | 12 rustproof metal grommets |
| Fabric Weight | 6-8 oz/yd² drape; 10-12 oz/yd² heavy |
Related searches
What to check before buying
- Measure rod height from floor and subtract 1 in; confirm the curtain length you pick (78/84/90/96 in) matches that number, not the ceiling height.
- Check rod load and mounting: long curtains weigh more; confirm wall anchors or ceiling-mount brackets are rated for the fabric weight tier.
- Confirm width coverage: rod width × 1.5–2 = curtain width; a 72 in wide long curtain on a 60 in rod gives minimal pleating.
- Verify liner compatibility: if using a decorative outer curtain, buy a same-length waterproof liner and enough rings for both panels.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds. Updated Nov 22, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.