Housewares Guide

Photos from current listings. Actual item, color, and included accessories may vary.

Freestanding Tub With Shower Buying Guide

A freestanding tub with shower combines a floor-mounted tub filler, hand-shower, and often a freestanding tub into one footprint-saving package for bathrooms without a separate shower enclosure. The core trade-off is floor-mount plumbing compatibility versus the tub's acrylic gauge and base reinforcement, which determine wobble, heat retention, and long-term durability. Buy a freestanding tub only when you have confirmed a floor drain location and a slab or subfloor that supports a 60-90 gallon filled load; otherwise choose a built-in alcove tub with a wall-mount filler.

Filler Mount:Floor-mount single-hole vs two-holeTub Material:Acrylic 3-6 mm over fiberglass baseHand-Shower Flow:1.8-2.5 GPM restrictorRough-In Drain:3/4 in. drain line, floor stub
Typical price range$237.99

At a glance

Category
Bathroom Accessories
Last updated
Nov 22, 2026

Current offers

Highlights

  • Freestanding tub fillers use either a single floor rough-in hole (combined hot/cold supply) or a two-hole rough-in; single-hole thermostatic mixers simplify installation but require a specific mounting base kit.
  • Acrylic tubs are graded by sheet thickness and fiberglass backing: 3-4 mm acrylic over 5-8 mm fiberglass is entry-grade and flexes; 5-6 mm acrylic with a full resin-coated base board resists oil-canning and holds heat longer.
  • Floor-mounted filler risers are typically 28-38 inches tall and must clear the tub rim by 4-8 inches; a hand-shower hose length of 59 inches (1.5 m) is the practical minimum for seated rinsing.
  • Hand-shower flow is regulated by a flow restrictor: 2.5 GPM (9.5 L/min) is the US standard maximum; 1.8 GPM (6.8 L/min) models suit low-pressure systems but extend fill time on large tubs.

Best use cases

  • Small bathroom with a floor drain near a corner: choose a compact 55-59 inch freestanding tub plus a single-hole floor filler with integrated hand-shower to replace a tub-and-shower combo without framing a new enclosure.
  • Primary bath with a separate walk-in shower: skip the hand-shower filler and buy a plain floor-mount tub filler with a swivel spout; the tub becomes a soaking station and the shower stays dedicated.
  • Slab-on-grade or upper-floor installation: pick a filler with a mounting base plate and flexible supply lines rated for the floor build-up; skip two-hole rough-ins that require cutting the finished floor for a second supply line.
  • Rental or quick-refresh project: a freestanding tub with shower requires a new floor rough-in and drain relocation; opt for an alcove tub with a wall-mount shower valve instead to avoid slab or subfloor work.

Buying tips

  • Measure the tub's exterior length and add 4 inches on each side for clearance; a 60-inch tub needs at least a 68-inch wall span, and the floor filler should sit 2-4 inches from the tub rim, not behind it.
  • Match the filler rough-in to your plumbing: single-hole floor mixers need one 1/2-inch hot and cold supply plus a 3/4-inch drain line stub; two-hole models need separate hot and cold floor stubs spaced per the manufacturer's template.
  • Choose a tub with a reinforced base board and leveling feet; a 60-gallon tub adds roughly 500 lb of water weight plus the tub, so the subfloor must be rated for the point load at each foot.
  • For hand-shower performance, select a filler with a ceramic-disc valve and a 2.5 GPM restrictor; brass-bodied mixers outlast zinc-alloy bodies in hard-water areas where mineral buildup stresses internal cartridges.

Specs

Filler MountFloor-mount single-hole vs two-hole
Tub MaterialAcrylic 3-6 mm over fiberglass base
Hand-Shower Flow1.8-2.5 GPM restrictor
Rough-In Drain3/4 in. drain line, floor stub

Related searches

What to check before buying

  • Confirm the floor drain centerline is within the tub's drain cutout range (typically 8-12 inches from the tub end) and that the drain trap can be reached from below or through an access panel.
  • Verify the filler's floor rough-in hole diameter (usually 1-3/8 to 1-1/2 inches) matches your drilled opening and that the supply lines reach the valve body without kinking.
  • Check the tub's shipping dimensions against the bathroom door and stair turn; a 60-inch freestanding tub often needs a 30-inch-wide doorway and a clear diagonal path.
  • For upper-floor installations, confirm the joist direction and add blocking under the tub feet; a filled 60-gallon tub concentrates 120-150 lb per foot.

FAQ

All Bathroom Accessories buying guides

Data sources: eBay / Amazon listings and product attribute feeds. Updated Nov 22, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.