Bathroom Light Fixture With Outlet Buying Guide
A bathroom light fixture with outlet combines vanity lighting and a GFCI-protected receptacle in one hardwired unit, eliminating the need for a separate wall outlet near the sink. The core trade-off is between integrated GFCI safety and simplified wiring versus added bulk, code-compliance limits, and reduced fixture style options. Choose a UL-listed model with a built-in GFCI and damp-location rating for a safe, code-compliant install; skip any fixture that relies on a non-GFCI outlet or lacks a damp/wet rating.
At a glance
- Price range
- Varies by listing
- Category
- Lamps & Indoor Lighting
- Last updated
- Nov 22, 2026
Current offers
Highlights
- Integrated GFCI receptacles are required by NEC for bathroom outlets; fixtures with a built-in GFCI meet this without a separate wall box.
- Damp-location rating (UL 1598) is mandatory for bathroom fixtures; wet-location rating is needed only if the fixture is within a shower or tub zone.
- Most units use a 120V hardwired connection with a maximum 15A receptacle; some include a switch leg for separate light and outlet control.
- Housing depth and backplate size vary widely; deep models need a 2x4 electrical box with at least 2 inches of clearance behind the wall surface.
Best use cases
- Best fit: small bathrooms or powder rooms where adding a separate GFCI outlet would require cutting drywall—pick a fixture with a built-in GFCI and a shallow backplate.
- Best fit: vanity areas needing a razor or toothbrush charger—choose a model with a GFCI outlet positioned at least 6 inches above the countertop to avoid water splash.
- Wrong fit: shower or tub enclosures—standard damp-rated fixtures are not sufficient; you need a wet-location rated fixture with a sealed GFCI cover.
- Skip if: your bathroom already has a dedicated GFCI outlet near the vanity—a standard vanity light without an outlet is cheaper, slimmer, and easier to install.
Buying tips
- Confirm the fixture is UL or ETL listed and the outlet is GFCI-protected; non-GFCI outlets in bathrooms violate NEC 210.8 and fail inspection.
- Measure your existing electrical box: a 4-inch round or octagon box fits most units, but double-gang boxes may require a wider backplate or adapter.
- Check amperage: most integrated outlets are 15A; if you plan to use a high-wattage hair dryer, ensure the circuit is dedicated 20A and the fixture outlet is rated for it.
- Match the fixture width to your vanity: a light fixture should be roughly 75% of the vanity width for balanced illumination and outlet accessibility.
Specs
| Outlet Type | GFCI vs standard receptacle |
|---|---|
| Location Rating | Damp vs wet (UL 1598) |
| Electrical Box Fit | 4-inch round/octagon vs double-gang |
| Amperage | 15A vs 20A circuit |
Related searches
What to check before buying
- Measure the distance from the electrical box to the sink countertop—the outlet must sit at least 6 inches above the counter to stay dry.
- Verify your wall box depth: fixtures with deep GFCI modules need at least 2 inches of clearance inside the wall; shallow boxes may require a surface-mount extender.
- Confirm your bathroom has a ground wire; GFCI outlets require a ground connection for proper safety operation.
- Check the fixture's backplate dimensions against your wall space—some units are wider than standard 4-inch boxes and may overlap tile or mirror edges.
FAQ
Data sources: eBay / Amazon listings and product attribute feeds. Updated Nov 22, 2026.
Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.